Paper cutouts are put in a box that is lighted from behind, creating a stunning visual effect. Stunning shadows and depth effects are in store. It is possible to tailor this incredible piece of art to your own needs: Items for the home, wedding gifts, children’s nightlights, and more are available for purchase. Eight layers of paper were used to create the illusion of water reflections on the surface of this particular design. A high-level summary of the topic may be found in this video.
Choose a piece of paper as the first step.
Because of the importance of your conclusion, the length of your paper is required to reflect this. In the wake of this, I’ve made the decision to use A4. You can get the best cricut design on our website.
Your paper’s thickness.
The inverse is also true: more transparent materials are thinner than opaque ones. You may save money if you buy between 150 and 220 grammes of chocolate. When beginning to sketch, the top two levels are a good place to begin. You may leave a blank area in the middle of the page for the subsequent layers by drawing some trees on the left and right sides of the page. Cut the paper along the lines you drew using a scalpel knife.
Neighbors of the Lagoon
Layer 3’s bottom half should have a lake created in the lowest location. At the top of the lake, your main subject should be shown. It’s possible to use a unicorn, two people in love, or any other animal as an example. Go with the flow and let your creativity run wild!
An image of water in the sky.
In the fourth and fifth floors, there will be water reflection. It’s also possible to cut the lake’s upper border out of a thin piece of paper (70g or less). Create an upside-down copy of your main object by reversing the Layer 3 of your item on Layer 5.
Layers six through eight make up the whole three levels.
Your light box’s backdrop is made up of layers 6, 7, and 8. You may add mountains on the sixth and seventh layers, respectively.
Polyurethane foam-filled boards.
You may use foam board to make spacers. Small spacers were employed to divide each component.
Glue is used to join the pieces together.
Foam board should be used as spacers between each layer. There is no need to employ spacers between layers 3 and 4 since they are unique. You will be able to get a better reflection of the water if you use this technique. When glueing together layers 4 and 5, you don’t need to use spacers, or you may use a smaller gap than normal. I settled on a starting point of 0.5 cm. If the distance between the two sites is larger, the reflection will be more distorted.
The image should be held in place by a wooden frame.
The wooden frame’s depth should be somewhat more than the paper’s depth. Because of my 5-inch frame, I had to utilise a 7-inch deep 7/8-inch thick wood frame. Using four pieces of wood joined together, the frame should be made.
LED lighting is the way to go.
Install a Led strip behind the frame to light up the space. I provide a remote-controlled RGB LED strip that can be used to create whatever colour you like. To seal the frame, foam board might be utilised.
Keep an eye on the development of your project.
Finally, turn it on and enjoy the feeling of success you’ve just felt.
